Main function and features:
1. Built-in two temperature zone, I-zone use silicon molybdenum rod as heating elements, II -zone use silicon carbide as heating elements, can create a temperature difference between any temperature gradient within 300 ° C. 2. Adopted water-cooled KF quick flange sealing, the connection can be done only by a clamp flange. It is very convenient to put in and take out the specimen. Avoiding bolt leakage by artificial operation and reduced the ratio of heating tube damaging which caused by installation flanges. Adopted circulating water cooling flange , with the chiller to reduce the temperature of the furnace mouth , and thus well protect seals to ensure gas tightness of the high-temperature furnace tube; 3. Furnace chamber adopts imported polycrystalline alumina fiber, good heat preservation performance,durable use, high tensile strength, no miscellaneous ball, high purity, energy saving effect is better than domestic fiber material.effective insulation and energy saving. imported silicon molybdenum rod and silicon carbide rod as heating element, greatly improve its service life , 99.99% alundum tube with high density, durable use,not easy break. 4. Reserved vacuum and gas path fast interface, could connect with our vacuum system or mixed gas system directly. 5. Reserved 485 convert interface, can be connected with PC through software. It has remote control, real time tracking, history recorder, and output report function. And can be installed the paperless recorder for data storage and output. 6. Built - in thermocouple, real-time monitoring the temperature of the heated material(for optional purchase). 7. On the flange can add a observation window, to real-time observe the sintered material conditions (for optional purchase). 8. Over-temperature will alarm and automatic cut off the power, leakage protection function, safe and reliable operation. | 
