1200℃ Hydrogen tublar furnace is specialized for material sintering under hydrogen gas environment.Gas Inlet is controlled by electromagnetic valve and needle valve, Equipped with Hydrogen detector to detect safety of environment, when hydrogen concentration up to setting value, inlet and power supply will be shut off, which ensure safety of experiment. Automatical burning equipment is installed in outlet, just one key to start, easy operation. |
(Recommand: Put this furnace into fume hood to use) |
Main Function and Features:
1. Adopted KF quick flange sealing, only need a clamp flange the connection can be done. It is very convenient to put and take the specimen. Avoiding bolt leakage by artificial operation and reduced the ratio of heating tube damaging which caused by installation flanges. 2. Furnace lid can be opened, real-time observation of the heated material, and can rapidly cool to meet the material suddenly cold and hot experiments. 3. Adopt imported polycrystalline fiber vacuum absorption furnace chamber; the resistance wire is used high quality resistance alloy silk 0Cr27Al7Mo2, servicing time more longer. Max temperature can reach 1200℃. 4. Reserved vacuum, gas road fast interface, could working with our vacuum system or mixed gas system.
5. Reserved 485 convert interface, can be connected with PC through software. It has remote control, real time tracking, history recorder, and output report function. And can be installed the paperless recorder for data storage and output. 6. Built - in thermocouple, real-time monitoring the temperature of the heated material. 7. Cover open automatically power off, over-temperature alarm, leakage protection, safe and reliable operation.
|
Widely used in: material sintering under hydrogen gas environment |
Technical Parameters: |
Model | SKGL-1200H(CE Cetificate No.:GB/1067/4189/12 Issue 1) |
Furnace Structure | Double shell structure |
Chamber | Imported high pure polycrystalline alumina fiber from Japan, excellent heat preservation |
Tube | High purity quartz tube, Φ40/60/80/100*1000mm |
Seal flange | Stainless steel flange extrusion seal |
Temp. control system | with artificial intelligence technology, With PID control,self - tuning function,30 the heating and cooling program |
Display mode | Panel meter display |
Hydrogen detector | Show the percentage content of measured gas concentration, alarm and control the output |
Heating element | 0Cr27Al7Mo2 |
Thermocouple | N mode thermocouple |
Working temp | Max temperature 1200℃, continously working temperature≤1150℃ |
Heating rate | Recommend ≤10℃/min, Max 30℃/min |
Cooling rate | above 700℃≤10℃/min |
Heating zone length | Heating zone length: 410mm,Constant temperature zone length: 200mm(optional for extended) |
Size & Weight | Instrument: 410*690*650mm(D*W*H), N.W.: 85kg(exclue Flange and tube) |
Power supply | AC220V,50/60Hz, Rated power4kw |
Standards | GB/T 10066.1-2004、GB/T 10067.4-2005 |
Standard configuration | Furnace 1set, Flange 1set, "o" rings 4pcs, Quartz tube 1pc, pipe plug 4pcs, crucible hook 1pc, hydrogen detector 1set, Igniter 1set, Manual book 1pc, certificate 1pc, warranty card 1pc |
Optional vacuum | ≤50Pa(normal mechanical pump + dial pressure gauge), ≤10Pa(higher mechanical pump+ digital pressure gauge) ≤0.005Pa(molecular pump system) |
Optional mixing gas system | Multiple channels float, mass mixing system |
Optional accessories | Furnace hobs, Quartz or alumina crucibles, quartz tubes, high temperature gloves, software, paperless recorder, fume cupboard |